HSS M2 M35 Material DIN3972 BP2 Module Gear Cutting Hob Cutter with PA20°Module range: m1-m22, DP1.5...
PA20° HSS M2 Material DIN3972 BP2 Module DP Involute Gear Hob Cutter with TiN CoatingModule ra...
Standard Bore for Gear Cutting HobsStandard bore for gear hobs is 8mm, 10mm, 13mm, 16mm, 22mm, 27mm,...
Taper Shanks for Shank Type Gear Shaper CuttersTaper shanks are MK K2, MK K3, MK K4, MK K5Material f...
Standard Bore for Gear Shaper Cuttersstandard bore diameters for shaper cutters: 20mm, 31.743mm, 44....
Bohler S500 for Shaper Cutters and HobsMaterial composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3....
Bohler S705 for Gear Hobs and CuttersMaterial composition of S705: C-0.92, Cr-4.10, Mo-5, V-1.9, W-6...
Bohler S790 Microclean for HobsMaterial composition of S790: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5,...
Bohler S590 Microclean for HobsMaterial composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5,...
Processing Steps for Carbide Gear HobsChongqing Jiangxing Tools is supplying carbide gear hobs with...
Solid Gear Hob with Standard Dimensionsthe following table shows that standard hob dimensions suited...
Standard Keyway for Hobsbore diameter of gear hobs: 22mm--keyway is 6mmbore diameter of gear hobs: 2...
HSS Material Procurement and IdendificationOur hob material is bought directly from the famous suppl...
Gear and Involute Spline HobModule: m1-m20, Pressure angle: PA20°Tooth profile to DIN3972 standardge...
Standard Gear Shaving CutterChongqing Jiangxing Tools is manufacturing standard gear shaving cutters...
Standard Gear Shaping CuttersChongqing Jiangxing Tools is manufacturing gear shaping cutters in modu...
Complete Spline Data for Ordering Straight Spline Hobs1, No. of splines2, Spline width3, Outside dia...
Complete gear data for ordering gear hobbing tools1, normal module/DP2, No. of teeth3, Normal pressu...
Various Forms of Gear HobsChongqing Jiangxing Tools is is supplying various forms of gear hobs such...
Various Forms of Gear Shaper CuttersChongqing Jiangxing Tools is supplying various forms of gear sha...
Measurements on Gear Hobs in according to DIN 3968Basic data on hobs: Drawing no., Normal module, Pr...
Powder Metallurgy HSS ASP 2055ASP2055 is a high alloyed grade with a refined carbide structure for h...
Powder Metallurgy HSS ASP 2078ASP2060 is a high alloyed grade for applications needing high hardness...
