Bohler S705 for Gear Hobs and Cutters
2022-08-19 13:58:18
jiangxingTools
3064
Bohler S705 for Gear Hobs and Cutters
Material composition of S705: C-0.92, Cr-4.10, Mo-5, V-1.9, W-6.20, Co-4.80
Standard: 1.3243, HS6-5-2-5, EN ISO 4957
Performance feature of Gear Hobs and Cutters with S705:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相关文章
-
Timing Pulley Hob for (AT.)D.T AT10
Timing Pulley Hob for (AT.)D.T AT10timing belt profile: (A.T)D.Tbelt type: AT10common range: 12-15T,... - HSS M2 Material for Gear Cutting Tools and Gear Hob
- PA20° DIN3972 Standard Gear Hob with Module m14
- PA20° Pre-shaving Gear Hob with Module m4
- Nominal PCD 180mm M2.5 Gear Shaving Cutter with PA20°
- PA20° Standard Gear Milling Cutter with Module m16
- PA30° DIN5480 Involute Spline Gear Hob with Module m1.5
