Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2926
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相关文章
-
Standard Gear Hob with Basic Profile DIN 3972-Ⅱ
Standard Gear Hob with Basic Profile DIN 3972-ⅡModule: m0.5-m22, DP, pressure angle: PA20°solid gear... - Low Speed Bore Type Solid Carbide Hob for Soft Tooth Oil Cutting
- PA20° PCD 75mm Disk Type Gear Shaper Cutter with Module m1~m4
- PA20° Pre-shaving Gear Hobber with Module m2.5
- Various Forms of Gear Hobs
- PA20° Module m1 Standard Involute Gear Hob
- Chongqing Jiangxing Tools
