PA20° HSS M2, M35 Gear Cutting Hobs with Semi-Topping Tooth Profile
2022-08-22 13:58:41
jiangxingTools
3114
PA20° HSS M2, M35 Gear Cutting hobs with Semi-Topping Tooth Profile
Semi-topping tooth profile is for reducing a noise with chamfer on out-diameter of a gear.
symbol is S-TOP, semi-topping gear hobs
Moddule, PA20° or PA14.5°，hao=1.25m, ho=D+F=2.25m, r=0.2m-0.39m
相关文章
-
HSS M2, M35, M42 Material Gear Shaper Cutter with PVD Coating TiN, AP
HSS M2, M35, M42 Material Gear Shaper Cutter with PVD Coating TiN, APModule range: m1-m16, DP1.5-DP5... - HSS Ground Chain Sprocket Gear Hob
- Pre-cutting disc-type gear shaper cutter with DIN 3972/III
- Timing Pulley Hob for (AT.)D.T AT20
- PA30° DIN5480 Involute Spline Gear Hob with Module m8
- PA20° Module m3.75 Standard Involute Gear Hobbing Tool
- Gashes for Involute Gear Hob
