Module, DP and CP for Spur Gear Hobs
2021-11-26 10:16:31
jiangxingTools
3130
Module, DP and CP for Spur Gear Hobs
In most English-speaking countries, diametral pitch and circular pitch are used instead of the module.
lt is best to convert the above values into module and to proceed with the calculated module in the usual way.
The equations for the conversion into module are:
m = 25.4 / DP
m = 25.4 · CP / 3.1416
You are welcome to visit our new website for more details on gear cutting tools and gear hobs.
相关文章
-
G50/G55 High Speed Carbide Gear Hob with AT Coating
G50/G55 High Speed Carbide Gear Hob with AP Coatingbase material: carbide G50 or G55bore type gear h... - Taper Shank Type Shaper Cutters with GB 6081
- PA20° DP6 Standard Gear Hobber Cutter with BPⅡ
- PA20° Profile DIN3972 Standard Gear Hob Cutter with Module m1
- Nominal PCD 180mm M2.75 Gear Shaving Cutter with PA20°
- Measurements on Gear Hobs in according to DIN3968
- HSS Material Procurement and Idendification
