Disc-type shaper cutter with DIN 5480
2021-10-18 11:42:33
jiangxingTools
4342
Disc-type shaper cutter with DIN 5480
Tooth profile to DIN5480 profile standard
Module: m0.6-m10
Number of teeth: Z14-124
Pressure angle: 30°
Bore: 31.743mm, 44.443mm
Please contact us for more module disk type gear shaper cutters on our website.
相关文章
-
PA20° Inserted Blade Gear Hob with Module m16
PA20° Inserted Blade Gear Hob with Module m16Material：HSS M2, M35Tooth profile is according to DIN39... - PA20° Profile DIN3972 Standard Pre-grinding Gear Hobber Cutter with Module m5.5
- HSS M2,M35 Material Gear Hobber Cutter with Stub Tooth Profile
- Measurements on Gear Hobs in according to DIN3968
- Single Thread Combination Pitch Gear Hobs
- Taper Shank Type Shaper Cutters with DIN 1828
- Timing Pulley Hob for (AT.)D.T (D)T10
