Hob Cutting Condition
2021-08-26 13:53:16
jiangxingTools
3949
Hob Cutting Condition
Cutting speed V=ΠDN/1000(m/min)
Π: Circle Ratio D(Hob OD), N(RPM)
A factor of cutting speed
1,Workability of material
2, The module of gear
3, Cutting depth
4, Gear class
5,Hob material
6, Required hobbing time per piece
7, Machine rigidity
相关文章
-
HSS M2, M35, ASP30, ASP52, S390 Module Spline Gear Hobs
HSS M2, M35, ASP30, ASP52, S390 Module Spline Gear Hobsmodule: m1-m10, DP, pressure angle: PA30°grou... - PA30° DIN5480 Involute Spline Gear Hob with Module m3.5
- PA20° PCD 75mm Bowl Type Gear Shaper Cutter with Module m1~m4
- Timing Pulley Hob for (AT.)D.T (D)T20
- Hobs for parallel side splines
- PA20° Full-Topping Gear Cutter Hob with HSS Material
- Bohler S500 for Shaper Cutters and Hobs
