Solid Carbide Hob
2022-11-03 10:00:08
jiangxingTools
2920
Solid Carbide Hob
Processing step for tungsten carbide gear hob cutter as following:
step o1-raw carbide material
step 02-inside diameter
step 03-end face grinding
step 04-hub grinding
step 05-tooth groove grinding
step 06-tooth profile grinding
step 07-final inspection
step 08-coating
相关文章
-
PA20° DP8 Standard Gear Hobbing Cutter with BPⅡ
PA20° DP8 Standard Gear Hobbing Cutter with BPⅡdiametral pitch: Dp8, pressure angle: PA20°hob size:... - Gear Hobbing Tools Pre-Grinding Gear Hob Cutter
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob Cutter with Module m1.75
- Considerations when selecting hobs
- Plunge Cut Shaving Cutter
- Description of Gear Hob
- Finishing Gear Hob with Basic Profile DIN3972-Ⅰ
