Description of Gear Hobbing Workpiece
2021-12-16 08:51:59
jiangxingTools
3416
Description of Gear Hobbing Workpiece
1) Module
2) Pressure angle
3) Helix angle
4) Number of teeth
5) Tip diameter
6) Root diameter or toot height
7) Profile displacement factor or standards for setting the tooth thickness
8) Gear width
9) Material and tensile strength
10) Number of workpiece to be machined, lot size, if applicable
相关文章
-
PA20° Profile DIN3972 Standard Gear Hob Cutter with Module m9
PA20° Profile DIN3972 Standard Gear Hob Cutter with Module m9Tooth profile：DIN3972-2 standard, GBMat... - The purpose of hob tolerances
- Deep Counterbore Type Shaper Cutters with GB 6081
- Heat-treatment Hardness Standard for Hobs
- PA20° PCD 240mm Disk Type Gear Shaper Cutter with Big Module m14~m16
- PA20° Standard Involute Gear Milling Cutter with Module m3.5
- Timing Pulley Hob for STS 14M
